AEGIS® TurboGuard® Pre-Filters

Its technically improved 6 inch (152 mm) high-flow filter for the utility market. Graver is the world’s largest supplier of condensate system filters and components and has been manufacturing precoat and non-precoat septa for condensate systems for more than 50 years. Graver is the consistent technology innovator with more than 40 patents and numerous technical advances for condensate and high purity water applications.

Graver’s family of TurboGuard High Flow Filters will provide superior CRUD removal upstream of deep bed demineralizers.  TurboGuard High Flow Filters may also be used following ion exchange beds as a resin trap, or as highly efficient pre-filters before membrane systems.

Graver’s TurboGuard line of filters are manufactured in the USA at Graver Technologies manufacturing plants, under an ISO-9001 (2000) quality system.

Graver’s TurboGuard High Flow Filter integrates a number of improvements over currently available elements.  With the most experience of any supplier in condensate applications, Graver can access more than 50 years of experience when improving fundamental filtration in condensate and high purity water applications.

Filter Specifications

Media:

Pleated Proprietary

Inner core:

Multi-Layer Polypropylene

Gaskets/O-Rings options:

EPDM Quad Seal

Micron ratings:

1, 3, 5, 10, 20, 40, 60, 100 μm

Nominal lengths:

20" 40" 60"

Outside diameter:

6” (152 mm)

Maximum operating temperature:

180°F (85°C)

Differential pressure:

180°F@ 20psid (82°C @1.4 bar)

160°F@ 30psid (71°C @2.1 bar)

77°F @ 50psid (25°C @ 3.4 bar)

Maximum flow rates:

60” element up to 500 GPM (1892 lpm)

40” element up to 350 GPM (1325 lpm)

20” element up to 175 GPM (662 lpm)

Filter Removal Efficiency

1 micron

1

0.6

0.2

3 micron

3

2

1.5

5 micron

5

4

3

10 microns

10

8.5

6.5

20 microns

22

19

14

40 microns

38

18

15

60 microns

60

35

20

100 Micron

100

75

45