LOTUS – CHLORINE DIOXIDE GENERATOR

WITH PROBE FOR MEASUREMENT

LOTUS MINI is all-round solution for all your need of CHLORINE DIOXIDE GENERATOR water disinfection. LOTUS MINI with probe measure system produces, doses and controls chlorine dioxide for water disinfection. It is equipped with ClO2 probe (SCL2 or SCL17) or an mV probe (ERH), a probe holder and a filter.

Chlorine dioxide is produced from diluted base chemicals: acid-chlorite process by hydrochloric acid (HCl 9%) and sodium chlorite (NaClO2  7,5%). Chlorine dioxide produced by LOTUS MINI is set to be proportional to the circulating water flow or based on a set-point – it is then dosed into the water flow. There is no storage of chlorine dioxide hence no chlorine dioxide gas or concentrated solutions exist outside of the process application.

LOTUS MINI chlorine-dioxide-gererator with probe measure is designed to produce chlorine dioxide in a reaction chamber. Multi-function valves on the injection points ensure the security of the reaction chamber.

The base chemicals are stored in tanks and fed into the reaction chamber through suction lances. Integrated level switches automatically stop the pumps when the tanks are empty.

GAS SENSOR OPTION
This model of LOTUS MINI is equipped with gas sensor detection.

FEATURES

  •  PERMANENT DATA STORAGE (WITHOUT BATTERY) with system log on display
  •  Stand-by input
  •  3 flow sensors (mod. SEFL) input
  •  Real time production data
  •  Multifunction valve (MFKT/V)
  •  IP65 protection (NEMA4x) of LOTUS control instrument
  •  Working temperature: 0-45°C (32-110°F)
  •  PVC reaction chamber
  •  Instantaneous ClO2 production
  •  ClO2 dosing in PROPORTIONAL mode
  •  Pumps and SEFL flow sensors monitoring
  • Service due data
  •  Water meter input
  •  Flow control input (flow alarm)
  •  Tank level controls (level alarms)
  •  LOTUS control instrument
  •  Pump for diluition water (grey)
  •  mA output
  •  ClO2 probe reading (LOTUS MINI SCL2 – LOTUS MINI SCL17)
  •  Temperature probe reading (probe and accessories not included)
  •  mV probe reading (LOTUS MINI ERH)
  •  ASA (Acrylonitrile Styrene Acrylate) enclosure

MODELS
LOTUS MINI 8 WITH PROBE MEASURE

  • HOUR CAPACITY
    • 8 g/h
  • PRESSURE
    • 8 bar
  • CHEMICAL CONSUMPTION
    • HCl 0.2 l/h
    • NaClO2 0.2 l/h
  • CONCENTRATION
    • 2 g/l

LOTUS MINI 20 WITH PROBE MEASURE

  • HOUR CAPACITY
    • 20 g/h
  • PRESSURE
    • 8 bar
  • CHEMICAL CONSUMPTION
    • HCl 0.5 l/h
    • NaClO2 0.5 l/h
  • CONCENTRATION
    • 2 g/l

COMMUNICATION

  •  ERMES
  •  MODBUS

CONFIGURATION

BASIC

  •  RS485 output to link other EMEC instruments

WIFI

  •  RS485 output to link other EMEC instruments
  •  Web ERMES remote control (PC, smartphone or tablet)
  •  Alarm messages via email

ADVANCED USB

  •  RS485 output to link other EMEC instruments
  •  Data Log on USB device

ETHERNET

  •  RS485 output to link other EMEC instruments
  •  Web ERMES remote control (PC, smartphone or tablet)
  •  Alarm messages via email

2G – 3G

  •  RS485 output to link other EMEC instruments
  •  Web ERMES remote control (PC, smartphone or tablet)
  •  Alarm messages via email
  •  Alarm messages via SMS

MODBUS

  •  Connection to other PLC instruments via RS485 or TCP/IP for reading and modifying parameters

MIXTRON

MXF DOSERS – WATER POWERED DOSING PUMPS FOR FERTIGATION

The global growth of intensive, biological and niche cultivations has led MIXTRON to develop a proportional volumetric doser range characterised by technical, innovative and advanced solutions, aimed to best guarantee dose precision even in the most critical environmental conditions.

Our specific product is an essential tool for those who work in industry and anyone who has to guarantee a product, dispensed in precise percentages necessary for fertilization or pest control. Thanks to their easy application, our dosers can even be installed on self propelled vehicles to optimise the time required to fertilize or irrigate large plots of land.

Mixtron doses are the only ones on the market to come with pressure and temperature gauges which, visually, can provide the operator with a clear indication of whether the conditions of use are optimal or whether adjustments are required to avoid over heating problems.

PRISMA Dosing Pump

The PRISMA dosing pumps: the incomparable accuracy of the stepper motor – EMEC.

EMEC is proud to introduce the new stepper motor-driven dosing pump- PRISMA, the best solution for high-accuracy metering and extreme reliability.

Thanks to the new stepper motor and to the Multi-Function software, the PRISMA dosing pump offers complete control over dosing speeds. Working modes as well as great flexibility and repeatability, meeting even particularly complex application needs.

The PRISMA is also equipped with Level control, Alarms and Stand-by, while available working modes include Constant, Constant with external input, ppm, %, mlq, Pause-work, Weekly, mA, Pulse, Volt, external Batch and manual Batch.

The PRISMA dosing pumps feature the encoder control knob for quick browsing through the configuration menus. A large display screen allows for easy control and to regulate the working parameters. By changing background colors the PRISMA back-light display is capable of signaling different working status: pump running (green); stand-by (white); warning condition (yellow); alarm condition (red).

[YouTube_WD id=”4″]

TURNDOWN

The PRISMA stepper motor-driven pumps give you the most accurate control over the stroke speed, providing an outstanding turn-down ratio of up to 4800:1.

It means that the PRISMA, through its digital multi-function control, can split up the dosing process into a maximum of 4800 steps. This is in order to offer the most homogeneous and precise distribution of the product to dose according to the required application.

SLOW MODE

The extreme versatility of the PRISMA dosing pump is also due to Slow Mode function. With Slow Mode enabled you can reduce the suction speed to 75, 50 or 25% of the normal speed, making easier, more reliable and extremely accurate the priming and the dosing, even when you have to handle particularly viscous liquids.

CAPACITY RANGE

The PRISMA stepper motor-driven pumps are available with dosing capacity of 5, 13, 28 and 80 l/h at a working pressure of 20, 10, 5 and 2 bar, respectively.